Protect Your Pride And Joy With The ghost autowatch immobiliser Immobiliser

Secure your prized possessions against theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique, changeable pin code sequence that can be up to 20 presses. This will allow your vehicle to begin.

Simple process to change the PIN code

Many owners are upgrading their security due to the rising number of vehicle thefts. There are many different types of aftermarket security devices including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system can assist in finding your car in the event of theft, it can not prevent the crime from happening in the first in the first place. Immobilisers, on the contrary does exactly what it says on the tin: it disables the engine of your car so that it cannot be started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves to steal your vehicle.

By using the buttons that are already present in your car The ghost device generates an exclusive sequence that has to be entered prior to the engine starts. This can be accomplished using the indicator stalk or window buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their car without having to use the button sequence. This is especially beneficial if you have to hand your car over to a valet service or parking since the immobiliser is active and not deactivated.

The Ghost is a truly unique and innovative device which works in conjunction with buttons on your vehicle instead of being a separate device. It's not just an effective deterrent to theft of your vehicle, but it can be used on future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Weatherproof small device

The Autowatch ghost immobiliser for sale Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also stops ECU swapping. It's a weatherproof, tiny device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to bypass immobilisers.

The benefit of CAN data over traditional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing techniques, nor can it be detected by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indicators and instead uses the buttons on your vehicle like the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can make this sequence as long as 20 presses for added security. The iPhone app only allows one connection, with a unique pairing code for the Ghost. All communication between the two devices is secured.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run only if the correct pin code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set such as a 30mph speed limit), so you can offer your vehicle to an attendant or valet without needing to enter a code.

Each vehicle is tested

The Autowatch ghost 2 immobiliser reviews is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from running its normal startup routine until you input an individual passcode. The system can be turned on or off by using your smartphone app without the need for additional wires.

The factory-installed immobilisers function by using a transponder that is integrated into the key. This sends a message to the ECU. The car will start if the correct code is sent. However, if a transponder from a different vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be stolen and started. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning, and even key theft. Only by physically towing your car away could a thief get it and not be able drive it.

Ghost immobiliser Problems uses the buttons in your car, such as the indicator stalk, steering wheel and door panels to generate an individual PIN sequence that can be changed that needs to be entered before you can drive. This is done without any extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that an installation has been made.

ghost immobiliser problems is more difficult to remove than car alarms, which require disarming using the buttons. This makes it a great addition to an GPS tracking device that can be used to locate your vehicle after it's stolen.

Emergency PIN code override

You don't need to look too far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning and hacking tools that allow them to start your vehicle without your original key fobs.

The ghost 2 immobiliser problems immobiliser has been designed to combat this and offer an additional layer of security in order to protect your vehicle from being targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel, and the centre console. The unique pin code is entered alongside the original key fob to stop the engine from beginning. The unique override pin can be found on a black plastic card that you will receive after your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden in the wiring of the vehicle and does not emit radio signals. Therefore, it cannot be detected by diagnostic software which can identify the type of security system you have installed. This makes it a great alternative to the tracking device.

Unlike most other security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via CAN data bus (brand dependant). This allows them to shut down the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm, or tracker with these systems but this must be stated prior to the installation of the device. They are also compatible with valet and service modes, and are a great alternative to a tracking device if you bring your vehicle to the dealer for repairs to an electrical issue.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. It is easier than ever before to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents you from adding the new ECU or key to circumvent the system, since only the PIN code allows the engine to be started.

The device is hidden in your car and is reached via the buttons on your steering wheel, the centre console and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits must be entered before you can start your vehicle.

This is the first aftermarket CAN-bus immobiliser that was developed. It will prevent your vehicle from being driven or even started in the event that you do not enter a PIN code before entering. If the device is armed and you try to drive off it will display a warning on your dash which will flash continuously for about 300m. If you enter your PIN code during this time, it will disarm the anti-hijack and your car will continue to drive as normal. If you don't enter your PIN at this point, the indicator will continue to flash and will require a new PIN code every time you attempt to start your car.