Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. It is discreet and doesn't require additional key fobs.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence of up to 20 presses. This will then allow the vehicle to start.

Simple PIN Code Change Process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are a myriad of aftermarket security devices available from tracking systems to immobilisers and alarms. Not all of them are equally effective at protecting your car. A tracking device can assist you in locating your vehicle if it's stolen however, it won't stop the crime. Immobilisers, on the contrary are exactly what they claim on the tin: they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your vehicle.

Using the existing buttons in your car The ghost device is able to create an exclusive sequence that has to be entered before the car immobiliser ghost's engine will start. This can be accomplished using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This feature is particularly useful when you need to hand your car over for valet parking or servicing since the immobiliser will still be active and not deactivated.

The Ghost is an innovative and unique device that operates with your vehicle's buttons rather than as a standalone device. This means it's not just a powerful security measure against theft from your vehicle but also a transferable device onto any other vehicles you have, making it more of an investment than traditional steering wheel locks.

Weatherproof tiny device

The Autowatch ghost immobiliser for sale immobiliser is a high-tech security system that protects your vehicle from key cloning, hacking and ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be placed in the vehicle without the need for extra wiring and has been extensively tested to ensure it works with all vehicles. It also is resistant to jamming devices which is the most common method used by thieves to get around the immobilisers in place.

The benefit of using CAN data is that it operates silently in comparison to conventional systems. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost ii immobiliser doesn't emit LEDs, but instead utilizes the buttons inside your vehicle like the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. The sequence can be extended to 20 or more presses for extra security. The iPhone app is limited to one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is secured.

The ghost immobiliser car immobiliser problems (Full Posting) also stops car thieves from adding a new key or replacing the ECU to bypass the immobiliser and start the engine. The engine can only be started if a valid PIN code has been entered. It can also be put into Valet/Service mode for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or to be serviced without needing to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts signals to prevent your car from starting up normally until you enter a custom code. The system can be activated and deactivated by using your smartphone's app without the need for additional wires.

The standard factory immobilisers function with a transponder which is embedded in the key. This transmits a signal to the ECU. If the correct code is transmitted the car will begin, but if a transponder is replaced by one from another vehicle the immobiliser won't recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser has been developed by an South African company at the top of the line in vehicle security technology. It safeguards your pride and joy from key cloning, hacking and even key theft. The only way that a burglar could take your car is physically towing it away, and even then they would not be able to drive it.

Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, and the doors, to generate unique PIN codes which must be entered to use your vehicle. This is performed without the need for extra hardware such as a key-fob and can be as long as 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals so thieves cannot make use of sophisticated RF scanning or code-grabbing technology to detect that security systems have been installed.

Ghost is more difficult to get rid of than car alarms that require disarming using a series of buttons. This makes it an excellent complement to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You do not have to look far on social media to find stories or videos of cars that were stolen using the most advanced technology tools. This includes key-cloning and hacking tools that allow them to start your vehicle without the original key fobs.

The Ghost immobiliser helps combat this and gives you an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It works by creating an unique pin code push sequence from your buttons on the steering wheel, door panel, and the center console. The unique pin code is entered in conjunction with your original key fob to stop the engine from getting started. The unique override pin can be found on a black card that you will receive after your installation. It is easy to remember since there aren't any LED indicators.

The device is hidden inside the vehicle's wires and does not emit radio signals, so it can't be identified by modern criminals with diagnostic software that can identify the security system you have installed. This makes it an excellent alternative to a tracking device.

Contrary to most security systems, which have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This allows them to disable a vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker to these systems but this must be specified prior to installing the device. They are also service/valet-mode compatible and are a great alternative to a tracker if you are you have your car checked for an electrical fault at the dealer.

Service/Valet Mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. With the ease of access to key cloning equipment and door lock pick sets it is now easier than ever for thieves to steal your joy and pride. We have created the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if you keys have been cloned.

It communicates directly to your car's ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system since only the correct PIN code can allow the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, centre console and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits must be entered before you can start your car.

This is the very first aftermarket CAN-bus immobiliser for the market that is being designed. It will stop your vehicle from being started or driven when you don't enter a PIN code before entering. If you're driving away with the device arming, an indicator will appear on your dashboard which will flash continuously for around 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this point the indicator will continue to flash and will require a new pin code each time you attempt to start your car.