how to get a saab replacement key to Replace a Saab 9-3 Key

The Saab 93 Key Fob 9-3 has a good deal of appeal for drivers. It is well-lit and has a strong performance engine. It has a very high safety rating.

However, it is important to ensure that you have at least two keys that are working for your vehicle. If you lose one key, it could be very costly to buy another one.

How to replace the ignition Key on the saab 93 key programming 9-3

If your car's keys won't engage in the ignition you must replace it. This guide will walk you through how to do it on the Saab 9-3. You'll have to replace the key, buy another reprogrammable device, and buy a new case for your key-fob.

Contrary to earlier models, modern Saab cars use a transponder in the key-fob rather than a physical key made of metal to unlock and start the car. The issue with this is that the reprogrammable battery inside the key-fob will wear out and won't hold a charge any longer. This is especially relevant if you use the same key for the lock you have.

The good thing is that the battery can be replaced fairly easily by an experienced locksmith. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to separate the key-fob. Insert an open-ended head into the slot that is in the middle of your case. It is important to work slowly, as the plastic is very thin and easily damaged.

After the case is opened, you can make the new key by combining lower part of the old key with a transponder and banana. This will ensure that the new key is mated to the CIM correctly, which could make a big difference when replacing the primary key for your Saab 9-3.

How to Replace the Ignition Key in a Saab 900

If you don't have two keys you'll need to take off the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. After the battery has been disconnected, you can remove the dashboard and trim pieces around the steering wheel. Once the dash is removed, you can place an screwdriver into the opening behind the ignition switch.

The ignition cylinder is equipped with a key lock that could prevent the vehicle from starting if it doesn't contain the key. If the ignition switch on your 900 isn't functioning, check the key to see if it's in the lock or is stuck in the barrel of the ignition. It's also an excellent idea to rotate your keys on a regular basis and clean them regularly so that they don't get bent.

Saab cars differ from other vehicles in that they don't use traditional keys made of metal. Instead, the car detects electric signals from the key fob via the use of a special microchip.

If you have lost your only working key fob the dealer will charge you top dollar to replace your computer module (known as the CIM). However, we can reprogram the existing computer's EEPROM and set it to accept new keys without replacing it. You'll save more than 50% on the price of the dealer! We call it the saab car key replacement KEY PROGRAM. Find out more about it here!

How do you replace the ignition Key in a Saab9-5

The metal part of a traditional Saab key is easy to copy, and also not much of a deterrent against theft of a vehicle. The electronic part of the key fob has an embedded chip that can identify the car when the key is inserted into the ignition switch.

Saab's anti-theft system has relied upon this technology for over a decade. It's not as good as an actual lock on the door but it makes the theft of your car much harder. Every Saab owner needs to keep a spare Saab key in their car.

The majority of new Saabs come with two keys from the factory. However, you can upgrade them at an agent using a handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which are equipped with newer, more modern features that require a separate key-fob to operate using a different procedure.

The dealer will replace the CIM or TWICE module of those vehicles if all keys have been lost, and charge you a high price for doing it. However, we can reprogram the EEPROM on your computer and make it accept new keys, and not replace the expensive modules.

How to replace the ignition Key in an XC90 Saab

It's probably time to replace your SAAB key fob if it's having difficulty turning the barrel of your lock. The procedure is quite simple and you don't have to visit a dealer. You can do it at home using a few basic tools.

First, you'll need to prepare the keys for your new car. Before you start, disable the anti-theft by placing blocks underneath the rear wheels and activating your handbrake. Place the key in the ignition and turn it to the "on" position. This will activate the accessories but not start the engine. Repeat this five times, and then leave the key in the on position.

You'll then need to purchase a new case for your key fob. You can find these at any auto parts shop, and they're typically very affordable. You can purchase them without electronics depending on the model.

To open the case to open the case, gently push the screwdriver with a flathead into the slot in the middle. The case should split easily, and once you've done that, you'll have access to the internal electronics. Use a flathead screwdriver to gently remove the electronic components.