Ghost 2 Immobiliser

ghost 2 immobiliser review is an wireless security system that guards your car against key cloning and hacking. It connects to the ECU unit via the CAN data network. It is quiet and can't be identified by thieves.

It is only disarmed by entering a specific button sequence (like PIN code) that you've programmed using the buttons in your car - such as those on the steering wheel or centre console.

Make sure you're protected from theft

Car theft is on the rise and cars are taken in just seconds. It is crucial that car owners think about the extra security measures they can take. Immobilisers are one of the best and most established ways to protect your vehicle. Ghost 2 Immobiliser Reviews - Https://Clinfowiki.Win/Wiki/Post:20_Fun_Details_About_Ghost_Immobiliser_Fitting - immobilisers are an excellent option as they are small, hidden within the wires of your vehicle, and don't emit radio frequency signals. This means they are untraceable and can be installed without affecting your vehicle's CAN bus system.

Unlike other immobilisers that rely on keypad input, tags or the exact sequence of buttons to disarm them, our ghost immobiliser near me can only be disabled with the exact pin code that was set up by us at the time of installation. This unique disarming sequence uses buttons on your steering wheels or doors to stop anyone from driving away from your car. This prevents thieves from copying your key or using a jamming/spoofing devices that disable standard car immobilisers.

A ghost immobiliser won't only stop your vehicle from being driven, but also from being stripped down to be used for parts. This is a rising issue in the UK because of the popularity of these automobiles. It can happen in minutes. TTW ghost immobilisers are easily programmed to guard vehicles from such attacks.

If you have our Ghost 2 immobiliser installed near me it will prevent your vehicle from being stolen from the service station or if it is being driven by an employee when your vehicle is on the lift at the garage. The Ghost can be set to Service/Valet Mode, which will only allow you, the consumer to use a specific button combination.

If you'd like to know more about our ghost immobilisers, or would like to receive a no-cost quote, contact us now. We'll be happy to help and give you peace of mind that your vehicle is protected throughout the day.

No LED or key fobs to give away its place of residence.

Protect your vehicle from the latest types of theft by using this non-detectable immobiliser that integrates into your vehicle's CAN data network. In contrast to other CAN immobilisers that are sold by aftermarket, Ghost does not rely on key fobs or LED indicators for its operation. Instead, it makes use of buttons found in the standard factory controls within your vehicle like those on the steering wheel, door panels, and the center console. This means a hidden pin code is created that must be entered before the vehicle can start, making it completely undetectable to thieves.

The CAN-BUS device makers have also included extra high-security measures to prevent the device being hacked or bypassed. It also offers CAN-BUS blocking and an immobiliser cut that is physical, meaning that even if your keys get stolen, the thief is unable to take off with your joy and pride.

Installing the CAN-BUS into your vehicle is a straightforward and fast process that takes only 30 minutes. We will send a member from our team to your area so that they can set an appointment and time that works for your needs. After your vehicle is fitted with a security system, you will be provided with an identification code and security codes to use on your phone and app. This makes it easier to use and will give you complete control over the security of your car.

The system can be installed to most modern vehicles, but If you own a unique or antique car, please get in touch to find out if it's compatible. The ghost immobiliser cost Immobiliser 2, with installation included, costs APS449 and your vehicle will also be added to the International Security Register if installed by one of our approved installers. Please do not hesitate to reach out to our helpful team with any queries. We'd love to hear from you.

Easy to Setup and Program

Immobilisers are fitted to the majority of modern vehicles to deter theft or hot-wiring. Unlike physical deterrents like steering wheel locks or wheel clamps an immobiliser is concealed inside your vehicle, making it nearly impossible to find and defeat.

The system connects directly to the CAN data network of your vehicle and stops the vehicle from starting unless you input a specific code. The unit is completely sealed and so small that it can be installed virtually anywhere in your vehicle without the requirement for additional wiring. It doesn't also emit a radio frequency signal so it cannot be identified by RF scanning or code grabbing equipment that is used by thieves.

Ghost makes use of the buttons on your steering wheel, door panels, and centre console of your car to create a customisable (like a pin code) disarm sequence which must be entered to start your car. The pin code sequence is dependent on 4 to 21 button presses and is easily changeable if required. You can also place your car in Service/Valet mode so that it is able to be operated, but the car cannot start or drive. This will ensure that your vehicle is secure when you bring it to the mechanic for valet parking or service and that the mechanic is unable to access your pin code to disable your system.

You can use our app to set an interim pin for your ghost device in the event that you plan to be away from your car for a long period of time, such as an extended work or holiday. You can also enter your pin code manually whenever you wish to drive the vehicle.

Our CAN bus immobiliser may be linked to an electronic remote key fob or tracker (Brand dependent) which will have priority over the ghost system. This is a great option for additional security in the case your vehicle is stolen or if you lose your keys.

If you're looking for a method to safeguard your vehicle from key-cloning or hacking, contact us now to find out how we can help. We offer our services throughout the UK, as well as in our own installation centre in Derby.

Service/Valet Mode

Modern cars are equipped with sophisticated eco systems that have stop/start systems that require the proper inputs to function properly. For example the voltage of the battery and temperatures of the engine, as well as external temperatures and the electrical systems that are in use. Sometimes these can cause problems and can often be difficult to determine if the issue is Ghost related or not. This is especially true if the vehicle was recently repaired or valet-parked. If this is the case, you can enter the ghost mode which allows the vehicle to be driven and start up without the need for a pin code. This is helpful when your car's being serviced by an independent garage or valet-parked.

Press the service button five times to enter service mode. The indication signal will flash twice to show that service mode is entered. It is possible to exit service mode at anytime by entering a PIN number. After you have gotten out of service mode, the Ghost immobiliser will resume normal operation.

This is a discreet system that communicates with the vehicle's ECU via the CAN data circuit, and connecting directly to the original vehicle buttons, and not using radio frequency signals as other immobilisers. This makes it nearly impossible for any other device to bypass or hack or even jamming devices that use spoof codes to mimic the original key fob will are not a problem for this system.

It is a TASSA verified anti-theft system that is in compliance with the highest standards of protection. It has an exclusive marking system that connects to the international security registry which is a requirement of insurance companies.

The ghost immobiliser price immobiliser is a tiny unit that can be easily concealed in your vehicle's factory wiring. This makes it virtually impossible for thieves to steal. The unit that is sealed is so small that it can be positioned in various places of the car, including under dashboards or on the steering wheels.

The system makes use of buttons in your vehicle, such as those on the steering wheel, door panels, or the centre console, to let you create a an unique and dynamic sequence of disarming up to 20 presses that need to be entered to start your vehicle. Anyone who has your unique pin code can enter it - so you, your family members, your colleagues, or friends can use it.